Interstate Trailers - 20TDT
General Description

20,000 lb. capacity tag-along trailer with tilting platform.

Load Capacity 20,000 lbs. at 55 MPH. (G.V.W.R. 25,900 lbs.)
Overall length 33’-10”.
Deck length 24’-0” tilting platform
Tilting angle: 12 degrees.
Deck width 8’-0” or 8’-6”.
Deck height: 36” unloaded.
Frame construction:

Pierced mainbeam construction with one piece interlocking crossmembers. Mainbeams chassis: (2) W12” x 16 lbs. Per ft., grade 50 Hi-tensile. Mainbeams tilt platform: (2) W8” x 15 lbs. per ft., grade 50 Hi-tensile. Crossmembers tilt platform: S5” I-beam x 10 lbs. per ft. grade 50 Hi-tensile on 22” centers. Siderails: C8” x 13.75 lbs. per ft. grade 50 Hi-tensile.

Underride protection:

Meets “National Highway Traffic Safety Administration” mandates FMVSS-223 & FMVSS-224.


8” x 3” rectangular tube, full width of trailer.


2” nominal oak secured to crossmembers with 5/16” torque screws.


Hutch 9700 multi-point spring with radius rod axle tracking adjustment. 44,000 lb. capacity.

Axles:     (2) Dexter 10,000 lb. capacity with oil bath hubs.

12 ¼” x 3 3/8” electric with integral break-away system.


8 hole steel disc.

Tires: (8) 235/80R16, (E).
Parking jack: 12,000 lb. dropleg, side crank.
Hitch: 4 position cast steel pintle eye, 1-5/8” stock, 3” I.D.
Tie downs: Heavy duty D-rings, 4 per side.
Cushioning Cylinder: (1) 3 ½” bore x 28” stroke internal flow Hydraulic.
Deck safety latch: Cantilever/U-bolt style, positive rattle free.
Safety chains: (2) 3/8” plated Hi-test with grab hooks.

12 volt DOT & ICC approved. All lights are LED type and flush mounted in rubber grommets. Wiring is run in flexible neoprene jacket and modular in design for ease of maintenance. 7 way plug.

Bookmark and Share

Comment / Questions 

Your Texas Truck, Trailer, Parts and Service Dealer

HOLT Truck Centers has the service bays, specialized tooling and technical experts to tackle all major systems and components, including brakes, drivelines and transmissions. HOLT has 74 dedicated truck engine service bays in 8 full-service truck facilities, supported by the HDA Truck Pride® parts network of over 60 authorized truck engine parts and service dealers in South Texas, providing bumper-to-bumper truck service and maintenance on most truck makes and models. We can diagnose and repair all your performance and power concerns. HOLT Truck Center also is the authorized dealer for Caterpillar® parts in 118 counties in Texas.

© 2018 Holt Texas, Ltd. d/b/a HOLT CAT and HOLT Truck Centers. All rights reserved. HOLT is a registered trademark of Holt Texas, Ltd.  Caterpillar and Cat are registered trademarks of Caterpillar, Inc., Peoria, IL.  |    Terms of Service    |    Privacy Statement